Arcoaire HP Single Phase Split System Deluxe Single Stg 2.5 Ton 43k BTU Coil 80Pct Gas Furnace 090 MBH 14.5 SEER2

Vendor Name:

Arcoaire

URI Part Number:

Arcoaire HP Single Phase Split System Deluxe Single Stg 2.5 Ton 43k BTU Coil 80Pct Gas Furnace 090 MBH 14.5 SEER2

Shipping Weight (Lbs.):

200

Energy Star:

Not Energy Star Compliant

Heating Input (BTUH):

090 MBH Heat

Includes:

H4H5S30AKAAA, N80MSN0901714A, EAM4X43L21A, HPKIT5

Nominal Capacity (BTUH):

30000

Cooling Efficiency (EER2):

12

Cooling Efficiency (SEER2):

14.5

Heating Efficiency HSPF2:

7.5 HSPF2

System Indoor Type:

Gas Furnace

System Outdoor Type:

Single Stage

System Coil Configuration:

Multi Position "A" Coil

Furnace Efficiency:

80

System Nominal Tons:

2.5 Ton

AHRI System Number:

212336219

• Scroll Compressors on all models
• Welded Aluminum Tube / Aluminum Fin Coil
• Improved Efficiency w/ Multi Directional Internal Enhancements
• Less Sensitivity to Pressure Drop
• Heat Shrink Wrap Protects Copper / Aluminum Joints
• AL/AL w/ Zinc Cladding Provides Enhanced Corrosion Protection
• Approximately 50% Lighter than Copper Coils
• Bi Flow Filter Drier Supplied for Field Installation
• Suction Line Accumulator Standard
• Self Configuring Operation & Text Based Diagnostics w/ Ion Control
• Compressor Sound Blanket & Isolation Grommets Factory Installed
• Extended Service Valve to Accommodate Press Fittings
• High & Low Pressure Switches
• Outdoor Temp Sensor Factory Installed
• Factory Charged w/ R410A Refrigerant
• Long Line Set Capability (refer to spec sheet for details)
• Low Ambient Cooling Capable w/ Optional Kit
• Galvanized Steel Cabinet w/ High Gloss, Baked on Powder Coat Paint
• Corner Posts for Added Cabinet Strength
• Coated Hail Guard Coil Protection
• Post Painted (black) Coil
• Coated Cabinet Screws
• Reliable Time / Temperature Defrost Control
• Internal Pressure Relief Valve & Internal Thermal Overload

Gas Furnace

• Four position – up flow/down flow/horizontal installation
• 33-1/3” (847mm) high
• Electronic Air Cleaner & Humidifier terminals
• Factory shipped for natural gas, LP conversion kits available
• 18 speed EC constant torque motor (Set up w/ app)
• Twinning capable (select sizes) w/ kit
• Category I venting (Common venting with other Category I appliances)
• Three position inducer elbow capability
• Masonry chimney adapter available
• Through the casing flue pipe for counter flow applications
• RPJ Aluminized steel heat exchanger
• In–shot burners
• Direct ignition with Silicon Nitride igniter
• <2% all leakage @ 1" WC (ASHRAE 193)
• Innovative knobs for easy door removal and secure attachment
• Self diagnostics (3 digit code)

Evaporator Coil

• Thermostatic Expansion Valve (TXV)
• Multi-position airflow design
• Sturdy galvanized steel cabinet
• Non-ozone-depleting R-410A refrigerant
• Capacity: 1.5 - 5 tons
• Cased A coil design for efficient heat transfer in a compact size
• Corrosion-resistant all-aluminum coil
• Fully insulated cabinet
• Corrosion-free sloped drain pan design helps reduce mold and bacterial buildup